DESIGN RESOURCE CENTER

  
Welcome! Please Log In
passwords are case sensitive
Forgot password?
Need an account?
Log In
PE4239EK Peregrine Semiconductor
Frequency Control Evaluation Board
The SPDT Switch Evaluation Kit board was designed to ease customer evaluation of the PE4239 SPDT switch. The RF common port is connected through a 50Ω transmission line to the top left SMA connector, J1. Port 1 and Port 2 are connected through 50Ω transmission lines to the top two SMA connectors on the right side of the board, J3 and J2, respectively. A through transmission line connects SMA connectors J4 and J5. This transmission line can be used to estimate the loss of the PCB over the environmental conditions being evaluated. The board is constructed of a two metal layer FR4 material with a total thickness of 0.031”. The bottom layer provides ground for the RF transmission lines. The transmission lines were designed using a coplanar waveguide with ground plane model using a trace width of 0.0476”, trace gaps of 0.030”, dielectric thickness of 0.028”, metal thickness of 0.0021” and εr of 4.4. J6 provides a means for controlling DC and digital inputs to the device. Starting from the lower left pin, the second pin to the right (J6-3) is connected to the device V1 or CTRL input. The fourth pin to the right (J6-7) is connected to the device V2 or CTRL/VDD input.
 
Key AttributesValue
Frequency Range : Minimum Frequency0 MHz
Frequency Range : Maximum Frequency3000 MHz
Availability
Request Quote for Lead Time
QuantityUnit Price
1 - 100
$95.00
101+Get Quote
Quantity:


This product is available in the following countries:
  • Global
   
PEREGRINE SEMICONDUCTOR