DESIGN RESOURCE CENTER

  
Welcome! Please Log In
passwords are case sensitive
Forgot password?
Need an account?
Log In
PE4256EK Peregrine Semiconductor
Frequency Control Evaluation Board
The SPDT Switch Evaluation Kit was designed to ease customer evaluation of the PE4256 SPDT switch. The RF common port (RFC) is connected through a 75 Ω transmission line to J2. Port 1 and Port 2 are connected through 75 Ω transmission lines to J1 and J3. A through transmission line connects F connectors J4 and J5. This transmission line can be used to estimate the loss of the PCB over the environmental conditions being evaluated. The board is constructed with four metal layers in FR4 material with a total thickness of 0.062”. The transmission lines were designed using a coplanar waveguide with ground plane (28 mil core, 21 mil width, 30 mil gap). J6 provides a means for controlling DC and digital inputs to the device. The provided jumpers short the package pin to ground for logic low. When the jumper is removed, the pin is pulled up to VDD for logic high. When the jumper is in place, 3 µA of current will flow through the 1 MΩ pull-up resistor. This extra current should not be attributed to the device. Proper PCB design is essential for full isolation performance. This evaluation board demonstrates good trace and ground management for minimum coupling and radiation.
 
Key AttributesValue
Frequency Range : Minimum Frequency0 MHz
Frequency Range : Maximum Frequency3000 MHz
Availability
Request Quote for Lead Time
QuantityUnit Price
1 - 100
$95.00
101+Get Quote
Quantity:


This product is available in the following countries:
  • Global
   
PEREGRINE SEMICONDUCTOR