Kick-Start your IoT project with our free antenna integration service!

2021-09-20T08:13:01+00:00September 20th, 2021|Categories: Antennas, Featured, Ignion|

Accelerate your time-to-market with this innovative service. All you need to do is complete the form below to receive a ready-to-test antenna circuit customized to meet your requirements. This Kick-Start service is free of charge*, with results provided within 24 hours*. Deliverables include a recommended antenna design with an off-the-shelf Virtual Antenna™ and an optimized

Taoglas FXP830 Freedom Wi-Fi 2.4/5.8/7.1GHz Dipole Antenna

2021-08-03T19:54:29+00:00August 3rd, 2021|Categories: Antennas, Featured, Taoglas|

Ideal all-round antenna solution for squeezing into narrow spaces and still maintaining high performance, for example at the top of LCD devices The FXP830 is a high efficiency, small, dipole antenna covering 2.4/5.8/7.1GHz bands including Bluetooth, Wi-Fi and the newly established Wi-Fi 6/Wi-Fi 6E, making this an ideal solution for future-proofing an IoT device. This

Webinar: How does the Virtual Antenna fit the IoT world?

2021-07-17T21:32:52+00:00July 17th, 2021|Categories: Antennas, Don't Miss!!!, Featured, Ignion, Webinar|

August 12th, 10AM–11:30AM (China Standard Time) | Sponsored by Ignion and Richardson RFPD With the advent of 5G and the IoT, various wireless technologies and products emerged in a seemingly endless stream. However, the spectrum resources of sub-6G vary greatly among different countries and regions, which causes the same application and product to

RUN mXTEND: Optimize the antenna of your mangOH Yellow open platform

2021-04-27T15:59:14+00:00April 27th, 2021|Categories: Antennas, Article, Featured, Ignion|

Discover how to boost the RF signal on a mangOH® Yellow platform The RUN mXTEND™ cellular embedded IoT antenna into the mangOH® Yellow is an example of the new generation of tiny antenna boosters available for multiband connectivity. Integrating the antenna into the mangOH® Yellow fast prototyping super sensor ensures a fast and economic

Sequans launches an IoT Kit that covers all cellular IoT with embedded Virtual Antenna™

2021-05-24T18:01:54+00:00January 25th, 2021|Categories: Antennas, Development Kits, Featured, Ignion, Sequans|

Sequans NEKTAR-B Evaluation Kit covers all the cellular IoT worldwide bands by embedding the TRIO mXTEND™ antenna component Fractus Antennas has announced that Sequans Communications has launched the NEKTAR-B Evaluation Kit. NEKTAR-B is a prototyping platform to enable worldwide IoT cellular connectivity. The new NEKTAR-B covers all the cellular IoT worldwide bands by embedding the

Accelerate the design of your Wi-Fi 6E device

2021-05-24T18:24:04+00:00October 22nd, 2020|Categories: Antennas, Featured, Ignion, Reference Designs, Wi-Fi|

Wi-Fi 6E will extend Wi-Fi 6 into the 6 GHz. Ignion has the ANTENNA that enables all bands ONE ANTENNA The ONE mXTEND™ antenna booster is a standard antenna solution that supports all possible frequency coverage combinations of Wi-Fi 5, Wi-Fi 6 and Wi-Fi 6E. In other words, future-proofing! Dimensions: 7.0 mm x

Ignion RUN mXTEND™

2021-05-24T19:00:12+00:00August 18th, 2020|Categories: Antennas, Featured, Ignion|

GSM, UMTS, LTE (698–960 MHz, 1710–2690 MHz and 3400–3800 MHz) The Ignion RUN mXTEND™ Antenna Booster has been specifically designed for providing multiband performance in wireless devices (in particular in mobile devices), enabling worldwide coverage by allowing operation in the communication standards GSM850, GSM900, GSM1800/DCS, GSM1900/PCS, UMTS, LTE700, LTE800, LTE850, LTE900, LTE1700, LTE1800, LTE1900, LTE2000,

Go to Top