Worldwide Cellular Connectivity Evaluation Kit with Multiband Embedded Antenna

2021-12-19T20:52:56+00:00December 19th, 2021|Categories: Application Note, Featured, Ignion|

Sequans NEKTAR-B Evaluation Kit: Covers all the cellular IoT worldwide bands by embedding the TRIO mXTEND™ antenna component and the Monarch 2 GM02S LTE Cat M1/NB1/NB2 module. Application NoteThe new NEKTAR-B Evaluation Kit by Sequans helps any designer to develop any IoT next application in a short period of time. The reference design integrates an

NANO mXTEND™ for Wearables

2021-12-09T00:06:39+00:00December 6th, 2021|Categories: Application Note, Featured, Ignion|

Ignion's Smallest Bluetooth Antenna in Different Ground Plane Form Factors Application NoteWhen designing a wearable, the antenna should be small, versatile, and efficient. How can we meet all these requirements and avoid buying a new part for each of the endless list of form factors?In this application note you can learn how the NANO mXTEND™

From Module to Antenna: Cellular IoT Connectivity Made Easy

2021-10-25T18:22:08+00:00October 25th, 2021|Categories: Don't Miss!!!, Featured, Ignion, Sequans, Webinar|

Upcoming Webinar: November 10, 2021 | Presented by Sequans and Ignion Overview Cellular connectivity, unlike other connectivity technologies, has a larger barrier to adoption in IoT devices. One major challenge at the start of any IoT project is the hardware design - and notably the choice of the connectivity module and the antenna. Making

Virtual Antenna™ changes everything for IoT device makers

2021-10-12T18:47:12+00:00October 12th, 2021|Categories: Featured, Ignion, White Papers|

Ignion white paper No longer do device manufacturers need to be antenna experts or have lavish budgets to challenge in the booming IoT market. Ignion makes the lives of IoT device makers much, much easier. Its groundbreaking Virtual Antenna™ system slashes product development times from months to weeks — even for devices handling

Kick-Start your IoT project with our free antenna integration service!

2021-09-20T08:13:01+00:00September 20th, 2021|Categories: Antennas, Featured, Ignion|

Accelerate your time-to-market with this innovative service. All you need to do is complete the form below to receive a ready-to-test antenna circuit customized to meet your requirements. This Kick-Start service is free of charge*, with results provided within 24 hours*. Deliverables include a recommended antenna design with an off-the-shelf Virtual Antenna™ and an optimized

Webinar: How does the Virtual Antenna fit the IoT world?

2021-07-17T21:32:52+00:00July 17th, 2021|Categories: Antennas, Don't Miss!!!, Featured, Ignion, Webinar|

August 12th, 10AM–11:30AM (China Standard Time) | Sponsored by Ignion and Richardson RFPD With the advent of 5G and the IoT, various wireless technologies and products emerged in a seemingly endless stream. However, the spectrum resources of sub-6G vary greatly among different countries and regions, which causes the same application and product to

Fast and easy worldwide IoT development with reference designs and Virtual Antenna™ technology

2021-07-06T21:58:11+00:00July 6th, 2021|Categories: Featured, Ignion, White Papers|

Ignion white paper The wide range of potential bands to cover at the IoT design stage is endless, and on top of that, the developer usually isn’t sure where exactly the new device will be used. The IoT industry uses reference designs for its rapid deployment and reference designs need a standard antenna technology

RUN mXTEND: Optimize the antenna of your mangOH Yellow open platform

2021-04-27T15:59:14+00:00April 27th, 2021|Categories: Antennas, Article, Featured, Ignion|

Discover how to boost the RF signal on a mangOH® Yellow platform The RUN mXTEND™ cellular embedded IoT antenna into the mangOH® Yellow is an example of the new generation of tiny antenna boosters available for multiband connectivity. Integrating the antenna into the mangOH® Yellow fast prototyping super sensor ensures a fast and economic

Workshop: Easy Design of IoT Wireless Devices Embedding Antennas

2021-03-02T20:38:27+00:00March 2nd, 2021|Categories: Event, Featured, Ignion|

March 3rd, 1:30-6.00 PM CET. Workshop Embedded World Congress DIGITAL: CLASS 5.2: Easy Design of IoT Wireless Devices Embedding Antennas Fractus Antennas has been selected by the Embedded World Congress organization to be part of the innovators this year. The company and its IoT Partners present this workshop to technically show real case studies of

Go to Top